Wrinkles in inground pool liners can be one of the most unavoidable and sometimes even annoying problems for pool owners.
Not only do these wrinkles take away from the visual attractiveness of your pool, but they also might be the reason for damage that can happen if left untreated.
In this article, we’ll introduce various techniques to get rid of wrinkles from your inground pool liner, and along with the practical tips and expert advice, we’ll make sure that your pool is in such good condition that it stays in top condition.
These steps and prevention tips can assist you in achieving a flawless and welcoming pool surface, regardless of whether you are a current pool owner or are contemplating installing one.
Methods To Remove Wrinkles
The pool liner's wrinkles may negatively affect the way your pool looks and works.
Dealing with these wrinkles the right way is vital for both the visual and operational sides of the issue.
Here’s a comprehensive guide to effective methods for removing them.
1. Adjusting Water Levels
Water Level Lowering: Drop the water level in the pool to around the halfway point or lower. This renders the rearrangement operation of the liner less difficult.
Make Liner Flat: The liner roll pushes the liner towards the walls with the help of a pool brush or feet starting from the centre. Use delicacy so as not to break the liner.
Add Water Again: Linear smoothing is finished; now refill the pool again. The water's upward movement will cause the liner to be held more firmly in place.
Pro Tip: Doing this task on a hot day may be more advantageous as the liner material will be more flexible in the heat.
2. Using A Toilet Plunger
A toilet plunger can be a surprisingly strong weapon when it comes to getting rid of tiny wrinkles.
Ensure the liner is wet: This technique works best when the liner is wet.
Position the Plunger: Place the plunger over the wrinkle and push down softly.
Pull the wrinkle: Apply the suction to the wrinkle and pull it towards the edge of the pool.
Pro Tip: These are more prone to having smaller wrinkles, so the method is more efficient on vinyl liners.
3. Utilizing a Vacuum Cleaner
The wet/dry vacuum cleaner can help to remove the air pockets from the swimming pool liner, which are the cause of the wrinkles.
Cut Down the Water Level: Like the first method, reduce the water level to roughly the middle of the tank.
Stick the Vacuum Hose: Slide the hose between the liner and the pool wall. Ensure the hose is as close to the wrinkle as you can get it.
Switch on the vacuum: The vacuum will take out the air pockets, thus letting the liner be placed against the pool walls without any wrinkles.
Pro Tip: Check if the vacuum cleaner is made for wet use to avoid any electrical hazards.
4. Professional Re-Installation
In situations where the wrinkles are too serious or are not responding to treatment, the option of professional reinstallation may be necessary.
This is especially the case for older liners that may have gone through the normal aging process and have lost some of their elastic properties.
Drain the pool: The water must be completely drained.
Remove and Reposition the Liner: The liner is removed, smoothed out, and finally reinstalled.
Refill and Monitor: The pool is filled up again, and the liner is being watched very carefully to make sure that no new wrinkles develop.
Pro Tip: Regular maintenance and inspections can help prevent the need for such drastic measures.
Want to make your swimming pool look smooth and sleek again?
Get in touch with us now, and we will examine and fix the liner wrinkles so your pool stays in perfect beauty and is perfectly functioning.
Identifying The Root Causes
Before diving into the solutions, it is surely compulsory to go through the causes of wrinkles in pool liners first.
Some of the common ones are:
Improper Installation: Wrongly putting the liner in can be the very reason for the development of wrinkles from the very beginning.
Water Chemistry Imbalance: Altering or lowering the pH level brings about the stretching or shrinking of the liner, which is the reason for the wrinkles.
Temperature Fluctuations: Very low or high temperatures can be the reason for the expansion and contraction of the liner, thus developing wrinkles.
Water Leakage: A sluggish leak could be the cause of ground movement under the liner, hence a wrinkle formation.
Through the identification of the waterpark causes, one can initiate measures to guarantee the non-appearance of the wrinkles later on.
Preventive Measures
Prevention is better than cure. Here are some tips to prevent wrinkles in your pool liner:
Ensure Proper Installation: A liner that has been professionally installed is guaranteed to fit properly from the beginning.
Maintain Balanced Water Chemistry: Regularly test and adjust the pH and alkalinity levels of the pool's water to prevent the liner from shrinking or stretching.
Monitor Water Levels: Prevent the water level from dropping too low or rising too high, as this can cause the liner to move.
Regular Inspections: Periodically check your pool liner for any small signs of wrinkles and take care of them as soon as possible.
Conclusion
Wrinkles on the inground pool liner can be an inconvenience, but it is not a problem that cannot be solved.
By knowing the causes and putting into play the right solutions, you can keep the pool liner smooth and beautiful.
You can do this by either adjusting the water levels, using a plunger, vacuuming, or getting professional help.
The issue must be dealt with immediately to save you time and trouble in the future.
A well-maintained, smooth, wrinkle-free pool liner is critical both for the durability and the beauty of your pool.
If you're dealing with recurring problems with wrinkles or need professional help, contact us without any further thought.
Our company is a professional in the field of fibreglass and gunite pool installations that make your pool a cozy oasis. Contact us now for expert guidance and excellent service.
Comments